DMF-ZM-20 Dresser Nut 3/4'' Inch Dust Collector Pulse Jet Valve
The DMF-Z solenoid/diaphragm valve is kind of vertical-angle valve, with an included angle of 90° between inlet and outlet. It simplifies the connection between gas bag and blowing tube of a dust collector. It can provide stronger airflow and meet dust removing requirements.
The DMF-Y solenoid/diaphragm valve is kind of submerged valve (namely, insert valve), which is installed directly on a secondary gas bag and achieves better circulation quality. The valve has less pressure loss, and is applicable to the operations with lower gas pressure.
DMF-ZM The Solenoid/Diaphragm valve pulse jet valve is kind of vertical-angle valve similar to the z-series valves, suitable for connection between gas bag and blowing tube of a dust collector. It has fixed nuts for installation purposes at the inlet and outlet end, for easier installation and application.
The DMF-T solenoid/diaphragm valve is kind of through valve, with an included angle of 180° between the inlet and outlet (central line of both inlet and outlet are the same straight line). Also, the inlet is connected to a gas storage tank, while its outlet is connected to a blowing tube.
Technical Data of SBFEC Type DMF-ZM Series Pulse Jet Valve:
| | | | |
| | | | |
| Port size | mm | | | |
| in | | | |
| Blowing Area (m2) | | | |
| Number of Diaphragms | | | |
| Flow | Kv | | | |
| Cv | | | |
| Pressure (Psi) | |
| Temperature (℃) | |
| Voltage | AC220V, AC110V, AC24V, DC24V |
Main Dimension:
BFEC DMF Series Pulse Jet Valve For Dust Collector System:
| Thread Valve | | | | | | | |
| | | | | | | |
| Quick Mount Valve | | | | |
| | | | |
| Flange Valve | | |
| | |
| Embedded Valve | | | | | | | |
| | | | | | | |
Application of DMF Series Pulse Jet Valve:
Electromagnetic pulse valve, also called diaphragm valve acts as a “switch” for compressed air in the dust clean blowing system for pulse bag filters. It is controlled by the electric signals from the pulse-jet control device. This system cleans the filter bags cluster by cluster with high-pressure blowing to keep the pressure resistance of the baghouse within a pre-set range, and thus ensure the processing capability and the dust-collecting efficiency of the baghouse.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
DMF-ZM-20 Dresser Nut 3/4'' Inch Dust Collector Pulse Jet Valve Images
|
